Smart Home openHAB 2 Z-Wave integration and configuration

Smart Home – openHAB 2 Z-Wave Integration

This post is all about openHAB 2 Z-Wave Integration. I will explain how to install the Z-Wave Binding and some Z-Wave components to control your Smart Home with openHAB 2. The installation will be done on a Raspberry Pi and we will use the  RaZberry2 (ZMEERAZ2) module which supports a great distance (up to 200 meter). Furthermore I will show you how to configure the Z-Wave Binding and integrate a Fibaro Wall Plug (FIBEFGWPF-102) and the dimmable Bulb Domitech ZBulb (DOMEZBULB).

openHAB 2 Z-Wave Integration – Products

If you would like set up your small Smart Home of this post, you will need the following components.

  • Product
  • Features
  • Photos

Vilros Raspberry Pi 3 Complete Starter Kit---Enthalt: Raspberry Pi 3 Model B...

Gewöhnlich versandfertig in 24 Stunden & Free shipping
Last update was in: 16. December 2017 21:54

69.99

BUY THIS ITEM
Amazon amazon.de
  • Product
  • Features
  • Photos

Z-Wave Z-Wave.Me Razberry 2 Modul, 1 Stück, ZMEERAZ2

Gewöhnlich versandfertig in 24 Stunden & Free shipping
Last update was in: 16. December 2017 21:54

58.99

BUY THIS ITEM
Amazon amazon.de
  • Product
  • Features
  • Photos

Fibaro Wall Plug Zwischenstecker Typ F Schuko, GEN5, 1 Stück, FIBEFGWPF-102-5

Gewöhnlich versandfertig in 24 Stunden & Free shipping
Last update was in: 16. December 2017 21:54

49.88

BUY THIS ITEM
Amazon amazon.de
  • Product
  • Features
  • Photos

Domitech ZBulb dimmbare LED Leuchte Z-Wave Plus DOMEZBULB

Gewöhnlich versandfertig in 24 Stunden & Free shipping
Last update was in: 16. December 2017 21:54

30.99

BUY THIS ITEM
Amazon amazon.de

  • Product
  • Features
  • Photos

CanaKit Raspberry Pi 3 Complete Starter Kit - 32 GB Edition

Usually ships in 24 hours & Free shipping
Last update was in: 16. December 2017 21:54

$69.99 $74.99

BUY THIS ITEM
Amazon amazon.com
  • Product
  • Features
  • Photos

Z-Wave.Me RaZberry - Z-Wave Plus GPIO Card for the Raspberry Pi

Usually ships in 24 hours & Free shipping
Last update was in: 16. December 2017 21:54

$49.99

BUY THIS ITEM
Amazon amazon.com
  • Product
  • Features
  • Photos

Domi Tech DOMEZBULB Dimmable Z-Wave Bulb - White by Domi Tech

Usually ships in 1-2 business days
Last update was in: 16. December 2017 21:54

$130.00

BUY THIS ITEM
Amazon amazon.com

 

Advertisement

openHAB 2 Z-Wave Integration – Raspberry Pi Installation

How to build your openHAB 2 Raspberry PI and how to set it up is explained in the post Smart Home openHAB 2 Raspberry Pi Installation. Follow this guide to set up your openHAB 2 Server on the RPi. But please do connect the Razberry2 module, by putting it carefully on the GPIO Pins .

You will connect the Razberry2 module to the mared pins.

Smart-Home-openHAB-2-Z-Wave-Raspberry-GPIO

Your Raspberry Pi should look like this.

I found differnt versions on the internet of the module. Mine has a small button on the top (see red square on picture). If you are using the Raspberry Pi Starter Kit, that I recommend it fits nearly perfect, so that you may trigger the button by slightly pushing the top case down. But be careful!

Smart-Home-openHAB-2-Z-Wave-Razberry-ZMEERAZ2

So mount the top case carefully and connect your Raspberry Pi with your home network and the power supply.

Smart-Home-openHAB-2-Raspberry-Pi-Cable

openHAB 2 Z-Wave Integration – openHABian Configuration

Now connect to your Raspberry Pi using Putty. This is also explained in the post Smart Home openHAB 2 Raspberry Pi Installation. After logging in, please type the following command.

You will have to reenter the password. As soon as you see the configration screen chooste the menu item “Serial Port”.

If you are using the Z-Wave Razberry 2 module, set the following parameters:

Choose OK and reboot your Pi by typing the following command.

openHAB 2 Z-Wave Integration – openHAB 2 Z-Wave Binding

Your integration is of Z-Wave components is prepared now. So call the PaperUI by entering the following link in your browser. If your are not using openhabian, please replace openhabianpi by th IP address your Raspberry Pi.

In the tab bindings (1) search for the Z-Wave Binding (2) and click install (3).

Smart-Home-openHAB-2-Z-Wave-Binding-Install

openHAB 2 Z-Wave Binding – RaZberry 2 (ZMEERAZ2) configuration

You will have to add your  RaZberry 2 (ZMEERAZ2) Z-Wave module manually. Go to the inbox and click the circle with the + sign (1)

Smart-Home-openHAB-2-ZWave-Add

Choose the Z-Wave Binding (1) .

Smart-Home-openHAB-2-ZWave-Add-2

In the next step choose Z-Wave Serial Controller (1).

Smart-Home-openHAB-2-Z-Wave-Add-3

You will be in the parameters of the Razberry 2 module. Give a unique and good to remember ID (1). Put the following value into the field Serial Port (2):

If you use a Z-Wave USB stick you should enter the Serial Port /dev/ttyS0.

Smart-Home-openHAB-2-Z-Wave-Serial-Controller-Setting

Now check if your  your Razberry 2 module is online by calling the following link.

 

openHAB 2 Z-Wave Binding – Fibaro Wall Plug (FIBEFGWPF-102)

When your Razberry 2 module is online you are ready to for the integration of your Z-Wave components. Put your Fibaro Wall Plug (FIBEFGWPF-102) in a socket near your Raspberry. 

Call the following address.

Now choose  Z-Wave Binding (1) .

Smart-Home-openHAB-2-ZWave-Add-2

The search will begin. If your Fibaro Wall Plug is not recognized, click the small button on the Wall Plug three times.

Sometimes it is a bit annoying, that the components are not identified correct. For example you can see the Node 6 has been identified and not a Wall Plug. Not good, but as long as it works =)

Smart-Home-openHAB-2-ZWAVE-Steckdose-FGWPF-102-ZW5

As soon as you click the blue circle (1), you will need to type a name.

Smart-Home-openHAB-2-ZWAVE-Steckdose-FGWPF-102-ZW5-Thing-Add

After giving a unique name you will have to link the channels, if you did not activate the Simple Items set up. So call your Things again.

Now you will choose the installed Z-Wave component. You will be able to link the single channels by clicking on the blue circle in front of the channel. If you activated the simple mode, the channels should already been linked.

Smart-Home-openHAB-2-Z-WAVE-Steckdose-FGWPF-102-ZW5-Channel

As soon as you click on a channel, you will have to Create new item (1).

Smart-Home-openHAB-2-ZWAVE-Steckdose-FGWPF-102-ZW5-Channel-Item

In the next screen put in the needed parameters. For beginners, I recommend activating the Simpe Mode for Item Linking. To do this, call:

Activate Simple Mode (1) and click SAVE (2).

Smart-Home-openHAB-2-Simple-Mode

 

openHAB 2 Z-Wave Binding – Domitech ZBulb (DOMEZBULB)

Now we will integrate the Domitech ZBulb (DOMEZBULB). Switch of the power supply or even better pull the cable out of the socket. Screw in the bulb and follow the steps above to search for new Things.

Smart-Home-openHAB-2-Razberry2-Add-Thing-Lamp-2

Give a name.

Smart-Home-openHAB-2-Razberry2-Add-Thing-ZBulb

Activate the channel.

Smart-Home-openHAB-2-Razberry2-ZBulb-Channel

openHAB 2 Z-Wave Binding – Paper UI

As you might have recognized, I did not use any Items or Sitemap configuration this time. Because you are already able to control it by using the control function of the PaperUI

In the following image you will see the channels of the lamp (1) and the Razberry 2 module.

Smart-Home-openHAB-2-Zwave-PaperUI

So it does work without a sitemap. But I will use my existing sitemaps, because I have so much more options  to configure the layout.

Advertisement
We will be happy to see your thoughts

Leave a reply

One Smart Home - Your Smart Home Tutorial Blog